Wireframe means cool! Why is this type of prefabricated pool being bought more and more often?

Frame-type prefabricated pools are considered ideal for decorating a summer cottage. Installation of such a structure does not require special knowledge, the assembly takes a couple of hours, it can be disassembled and assembled at any time. And how much joy he will give to children!

In a frame pool in hot weather, the level of endorphin is directly proportional to the footage of the pool

A tubular pool is the cheapest option. Its price rarely exceeds 5-6 thousand rubles. The main thing is that the bowl is made of three-layer reinforced PVC. In this case, the pool will last a long time and will not break even from frequent jumps.

However, such pools must be dismantled for the winter. In the absence of water, the frame is very vulnerable to wind. And if you leave water, then water, when freezing, will destroy the bottom and sides

Another disadvantage of the "tubular" design is that, with frequent assembly and disassembly, the connections are "loosened", due to which the entire structure loses its strength.

The pool with steel fastening is not afraid of frost. It costs a little more: from 2 thousand rubles, but it will last longer. A cartridge filter is usually included with the pool, but it most likely will not cope with water purification, so it is better to purchase a sand-type filter in advance. The filter is a tank with special quartz sand inside, which provides better filtration.

Make sure that your pool is equipped with a foliage suction device from the surface of the water, and to clean the bottom of the pool you will need to get a water vacuum cleaner

The hotter the weather, the faster chemical cleaners evaporate from the water, the faster germs multiply. Therefore, the level of disinfectant should be checked at least once a week. There are special testers for this.

Pool cleaners are sold in special cases. There is also a special tester that will help determine the amount of chemicals in the water.

By the way, almost all of these substances are based on chlorine or activated oxygen.

Another important point - before installing the pool, be sure to clean the area

Best of all, lay a cloth or carpet to protect the thicket from mechanical damage. Any defect under the influence of water pressure can cause the pool bottom to burst.

Reinforced prefabricated structures are more wear-resistant.Metal mounts, which ensures their durability

It is better that the pool is reinforced from the outside with a special retaining ring, which will ensure the reliability of the structure

The frame of a multi-season pool is usually made of plastic-coated galvanized steel sheets, and the bowl itself is quite thick. Such structures will serve you for at least 15 years. In rare cases, such pools are laid in the ground. Although the manufacturers confirm that this is not necessary.

What kind of pool would you place on your site? Are you ready to build a framing structure or is a stationary pool better for you? Share your opinion with other readers.