Saving square meters, or How a bunk bed with a sofa can change the interior

Tags:Living room and bedroom, Children's room

How familiar it is - with modest square spaces, you want to fit everything into the room: a study, a full-fledged soft zone and an extra bed. A bunk bed with a sofa will help solve the problem of accommodating guests or children, even with the modest dimensions of the apartment. In favor of such a decision, there are three important "pros": attractive appearance, durability, ease of maintenance. To eliminate errors in the acquisition process and not experience difficulties in operation modern furniture, study our recommendations, which we will detail in this article.

This solution allows you to use the space in a rational way.

The content of the article

1 Bunk beds with a sofa below - photo and basic parameters
2 Convertible sofas convertible into a bunk bed
- 2.1 Transformation mechanisms, dimensions
- 2.2 Pros and cons, criteria for choosing transforming sofas with a bunk bed
3 Review of current market offers
4 Additional tips and helpful comments
5 Video: the process of transforming a sofa into a bunk bed

Bunk beds with a sofa below - photo and basic parameters

Bunk beds with a sofa in the lower tier are one of the most economical furniture options in terms of space. They are good for arrangement of bedrooms and for children, where literally every square meter is valuable.

Typical bunk bed with sofa

Before buying, you should pay attention to some of the nuances:

the size of the sitting and sleeping place should correspond to the physiological parameters of future users;
it is important to take into account the real loads in order to choose a bunk bed with a sofa of sufficient strength;
checking finishing materials and fillers will help clarify the features of care.

Main characteristics, advantages and disadvantages of bunk beds with a sofa below

The open lower part allows for universal use of standard sofas with suitable dimensions

The design implies the organization of a berth on the upper tier. To do this, create a frame with or without lamellas. A mattress is installed on them. Mandatory components of a bunk bed with a sofa - a ladder for lifting and sideensuring safe use. Racks are calculated based on the total maximum loads. Various options are available below.

One-piece structural frame is used to increase strength

The main advantage is the minimum space requirements. The sofa below is perfect for seating. If necessary, it folds out into a full berth.

The disadvantage is the inconvenience of climbing to the second tier. We have to strengthen the frame for reliability, install fences. Taking into account additional mechanisms, a rather complex design is obtained, which increases the cost of a bunk bed with a sofa.

Note! When comparing models, carefully check the materials, build quality and the convenience of the staircase installation site.

Related article:

Loft bed for adults and children. In the review, we will consider what a loft bed is, how it can be used in the interior, the varieties and features of homemade options, models and manufacturers, average prices, useful tips.

Varieties of furniture

This section presents typical bunk beds with a sofa, grouped by purpose. One of the classification features is the size of the berth. The following table will simplify the choice:

Length, cm	Width, cm	For age, years
155−165	75-80	Up to 8-10
165−180	80-90	10-14
180−200	90	More than 14, for adults
180−200	150−180	Double beds

Note! As a rule, a single top tier is designed for a load of up to 200-220 kg.

Children's bunk bed with sofa downstairs

In this option, the size of the bed is best chosen taking into account the rapid growth of the child. The standard safety equipment is especially carefully checked, the absence of sharp corners. Non-slip coatings (pads) on the steps will come in handy.

Equal sleeping places for two children are created in such equipment.

The sofa can be used for study sessions, games, daytime rest

Bunk bed with sofa downstairs for parents

Here, an increased berth size is needed at the bottom. In any case, you need to choose a product that matches the style of the interior. To simplify the task, the purchase of furniture is combined with "cosmetic" or overhaul.

When folded, a large sofa does not protrude beyond the boundaries of the main contour

Related article:

This article tells about how to do it yourself or buy a good loft bed with working area for a teenager... Detailed instructions and helpful comments will help you make the right decision quickly.

Features of bunk beds with sofa

Below are the details that deserve attention when choosing furniture. For a complete analysis, they are supplemented with up-to-date information on prices in the relevant market segment.

Materials of the main components of the structure

The power frame of bunk beds with a sofa is often made of steel. At a reasonable cost, a completely reliable design is obtained. Multi-layer coatings provide corrosion protection. It is convenient to attach components of mechanisms and other parts to such a base using standard fasteners.

The use of wooden parts is quite popular. In addition to lightening weight, it ensures strict compliance with the most stringent environmental standards. It should be noted that in order to increase the strength, it is necessary to use valuable hard rocks or increase the size.

The most common solution is chipboard

In this option, the main advantage is the democratic cost. The appearance of modern models deserves positive ratings. Expensive wood veneer and high-quality laminate are used to create a realistic appearance that does not differ from the parameters of a natural material.

Surface patterns protect against damage with a layer of colorless transparent varnish

The upholstery of upholstered furniture is selected taking into account the characteristics of the intended mode of use. For intensive use, natural leather or high-quality artificial substitutes are suitable. Some of the new materials even surpass natural samples in strength and other consumer parameters. The cost is much less.

Velor is a suitable option for sofa upholstery

This material does not obstruct the passage of air. It has pleasant tactile characteristics. Such surfaces provide good adhesion to bed linen, which does not need to be fixed with additional fixtures.

In a wide range of thematic proposals, it is easy to choose a solid fabric of a certain color, texture, pattern

It must be remembered that only specialized furniture materials are suitable for upholstery. They are designed for intensive loads. Their integrity and appearance remain in good condition for a long time. In order not to reduce the service life, the manufacturer's instructions for proper care should be followed. Use the recommended cleaning agents to clean a bunk bed with a sofa.

Fillers for the sofa and sleeping area

In the simplest version, the sofa is equipped with dependent spring blocks. They create a fairly good level of comfort and are inexpensive. A cheap analogue is foamed polymer boards (foam rubber). The softness of this material is perceived by some users as a significant disadvantage. To increase the rigidity, an additional layer of coconut fibers is used.

Improve the orthopedic qualities of the bases with independent spring units. Each element acts independently. This simplifies the task of creating sections with different levels of stiffness. In expensive models, high-quality latex is used, created from natural raw materials (hevea juice). It does not emit an unpleasant "chemical" smell, does not cause allergic reactions.

Similar solutions are used to create orthopedic mattresses

When choosing these products, you should check the upholstery parameters. Some models have different side parameters. If desired, with a simple turn, select a higher / lower rigidity, winter / summer mode. Mattress a bunk bed with a sofa is installed on a damping base made of transverse slats. Under it, a plywood substrate is fixed, which prevents dust from contaminating the bottom of the bunk bed with a sofa.

Additional equipment of the mattress: changing the inclination of parts using an electric drive, built-in massager, remote control

Related article:

Which mattress is better: spring or springless. Advantages and disadvantages of different types of mattresses, selection criteria, rating of manufacturers of orthopedic mattresses, average prices - read the publication.

Different types of folding mechanisms

The following examples show different options for transforming a sofa into a sleeping place and vice versa.

The classic version is the "book"

Sliding lower part. The backrest remains in place here. The number of supports increases, the reliability increases

Side roll-out mechanism. Roller supports are installed for easy movement

Algorithm for transforming a corner sofa

Conversion of a reclining sofa

Equipping furniture for convenient storage

Free from mechanisms cavities and special body parts of a bunk bed with a sofa are used to store bed linen, blankets, and other things. The ideas below can be implemented in your own project. Arrows indicate suitable places.

: Built-in drawer in convertible sofa

: Wardrobe and hollow steps with drawers

: The open shelf above the back is perfect for things that are often used

: The large drawer is supported on guides and corner rollers attached to the side walls

: There is enough space in the free space at the bottom for several stylish boxes

: Such a set of furniture can be made to order.

Convertible sofas convertible into a bunk bed

The production of multifunctional furniture is not just a fashion trend. The improvement of production technologies has a certain impact. With their help, even relatively complex mechanisms can be manufactured without extra costs. On the other hand, such products simplify the creation of comfortable conditions in relatively small real estate objects.

With a flick of your hand ... an unusual sofa turns into a bunk bed

Transformation mechanisms, dimensions

The previous picture shows only one of the many design solutions. The second tier is formed from the back and side supports. Hidden spring drives allow for effortless work.

With the help of such furniture, a beautiful living room is transformed into a cozy bedroom in a few minutes, no more

In some models, gas lifts ("gas lifts") are used to smoothly move parts of the structure.

The size of a bunk bed with a sofa is chosen so that the berths are 25-35 cm longer than the height of the users. Similar distances are left in width.

Pros and cons, criteria for choosing transforming sofas with a bunk bed

Unlike a conventional sofa, in this case, two separate sleeping places are created. This solution is perfect for guests. It is used in one-room apartments (studios), where father and son, mother and child live. This equipment helps to economically use the available space. Move components vertically, which is useful in tight spaces. When folded, upholstered furniture is no different from standard products intended for living rooms and offices.

The main disadvantage is the price. Even taking into account the advantages of modern technology, the complexity of the design increases the cost price. You shouldn't look for the cheapest models in stores. Excessive "economy" on the thickness of metal blanks and other parts significantly reduces reliability.

The next drawback is the complexity of transformation. You will have to perform a lot more actions in a certain sequence than when unfolding a typical "book" sofa. Relatively small batch sizes also increase the costs of manufacturing, transporting and storing individual items. Non-standard parts of mechanisms are more expensive.

Children's bunk bed with a transforming sofa, complete with hanging shelves

When visiting the store, be sure to check the convenience of working with the mechanisms

It is best to examine the display case. It can be difficult to identify actual efforts and difficulties from pictures and video instructions. The sizes are chosen taking into account the physiology of the users. Clarify the compatibility of dimensions with the characteristics of the room, aesthetic characteristics. Fabrics must be particularly resistant to abrasion, since some models do not provide for the use of an easily replaceable mattress

Review of current market offers

Brand / Model (SKU)	Dimensions, cm (Width × Depth × Height)	Notes	Price (as of June 2018), RUB
Borovichi-furniture / М-9657	204×115×173	The transformation mechanism is a "book". Chipboard with laminate. Accessories from European manufacturers. Top seat mattress sold separately.	17600
Olympus furniture / Nemo	211,8×98×173	"Book". Dimensions of the upper / lower berth in cm: 120 × 190/80 × 190. Two upholstery options. Left-hand and right-hand assembly is acceptable. The mattress is not included in the basic configuration.	14600
Elegy / New	209×86×173	The body is made of laminated chipboard 16 mm thick with veneered ends. The backrest is fixed in three positions. The set includes a mattress for the upper berth with independent springs. Spunbond, padding polyester and polycotton cover.	23400
MiK / PS618	190×140×162	Malaysia. The bunk bed with a sofa is made of solid hevea, reinforced with a metal frame. Top - horizontal wooden supports for the mattress. Upholstery - furniture tapestry (USA).	19900
ANDERSSEN / Splendid	223×104×74/158	In the process of transformation, a staircase and a fence are extended. Wide range of upholstery fabrics.	197000

Additional tips and helpful comments

To make your search easier, define your personal requirements in advance. Pay attention to the materials of the power frame and upholstery, mechanisms. Read reviews from real users for more information. In the comments leave your own comments, ask questions on the topic.