Photo grid for the fence: the nuances of country chic
A photo grid for a fence is one of the best options for decorating a fence. It is used from the side of neighbors or as an exterior decoration of the adjoining area. There are many models with images for every taste. In today's publication, the HomeMeHome editors will help you figure out this method of decorating a hedge, and also consider the pros and cons of such a finish.
The content of the article
Photo grid on fences: what it is, what it consists of
Surface treatment technology with this material has been known for a long time. For the first time it was used for the production of banner ads. The basis of this material is considered to be a reinforced PVC mesh, as well as an ordinary banner fabric. Each of them has its own characteristics. Therefore, users choose what material to print on, depending on the print style.
PVC surface
The basis should be chosen depending on the type of fence to which this type of decor will be applied. For example, if the design is used for mesh fences or gazebos, it is better to give preference to a photo grid. Its structure is perforated, so it will allow both wind and light to pass through. Even in bad weather, the windage of the material is practically absent, the load on the base of the fence is minimal. Therefore, it is permissible to mount such panels on fences with posts that are not filled with concrete.
Banner fabric
A drawing on a banner base is perfect if you need to decorate one side of a fence made of metal material. As a rule, the structure has a pattern only on the outside, and the inside differs in the reflection of heat and light. This creates discomfort for a person, especially if there is a recreation area or a playground in this area. Also, this state of affairs is unfavorable for a number of growing crops.
When installing a banner mesh with photo printing, the surface will absorb all the sun's rays. Accordingly, this zone will be an ideal place for planting fruit trees and vegetables. In addition, the yard will always be beautiful.
Characteristic
Among the important performance characteristics, several parameters should be highlighted:
- temperature range -40 ° С - + 70 ° С;
- warranty period 3 to 5 years;
- excellent material throughput;
- roll height 160-180 cm;
- fragments - 160 × 300 cm.
As for the existing images, each manufacturer has its own gallery with photos. From this list, the buyer can choose the option he likes. Sometimes it is allowed to print your illustration: a black and white photograph or some kind of work of art.
Advantages and disadvantages of a fence with photo printing
The use of photo grids in private sectors is justified by the opinion of many consumers. The owners highlight the following advantages of this material:
- ventilation and lack of greenhouse effect due to the porous structure of the polymer material;
- resistance to any climatic conditions. The material is not washed out after rain or snow;
- high quality paints of the applied drawing (bright, but natural, not irritating to the eyes);
- with proper installation, the coating does not tear or deform.
The disadvantages of this material include a decent cost, especially if the coating is purchased in separate modules. Also, the device may lose its properties if the cut of the material for hanging on the fence is made incorrectly. Therefore, it would be more rational to involve professional installers in this event.
Popular 3D images on fence grids: photos of the best options
When choosing pictures, many people prefer a 3D photo grid for the fence. Such models are successfully combined with hanging vegetation: weaving roses, rose hips or hops.
Collections from leading manufacturers for photo-printed fences
Pictures that are applied to the forged gaps of the fence are considered spectacular. One of the striking examples of a banner grid is shown below.
Recommendations for the selection of images for intake sections
It is recommended to use some tips when choosing a pattern for arranging a photo collection. Experts in the field of landscape design urge to be guided by the following rules.
- It is advisable to order a repeating pattern for long meshes. For example, if you need to trim a hedge around the entire site.Moreover, this design will look gorgeous on fences made of wavy or flat slate.
- Different fence ornaments with 3D photo effect are best installed on multi-level fences or translucent sections.
- As for the eurofence, for such surfaces, options with artificial landscaping, hanging pots are suitable.
- They try to purchase photo nets with flowering plants for wooden fences. The landscapes of the spring season will be combined well.
- A concrete block fence can be decorated with a mesh with the same image in natural shades.
- Variants with animals are suitable for decorating the inside of a fence, for example, next to a stable or a utility yard.
- The nautical theme is suitable for fencing the pool area.
The main thing is to correctly approach the choice so that the landscape design is the most effective and interesting.
On a note! With the help of decorative photo grids, you can successfully zone a large adjoining territory.
Photo grid installation: features and rules
Fence photomontage can be done in different ways. This, first of all, depends on what type of fence is applied to. Consider the mounting features.
On a metal or wooden base
The installation steps are similar, so it is advisable to combine them into one instruction.
- After buying a plastic photo grid for the fence, you need to cut it so that it matches the parameters of the spans.
- Remove the protective film from the back of the facade material, while trying not to damage the functional base, which is attached to the fence.
- Install metal rings along the edges with a step of 80-100 cm, depending on the length of one span. The diameter of the hardware must be 8 mm.
- Fix the canvas on the fence using self-tapping screws, having previously installed a washer under the head.
Please note that trimming should be done exactly along the intended edge, otherwise, you risk damaging the mounting material.
On the netting
The netting is a popular fencing option in private houses. To decorate it, it is also easy to use a colored coating, the main thing is to install it correctly.
- The first thing we do is cut the material in accordance with the size of the fence.
- Remove the protective layer from the back of the substrate.
- We mount the eyelets with or without bending the edges, retreat 2 cm from the edge.
- We fix the canvas on the fence using disposable cable ties and clamps.
You can fix the photo grid without using rings. To do this, fold the edges 2 cm from the edge along the entire perimeter, then fix it to the fence frame using press washers. For a more detailed understanding of the installation issue, see the video below.
Video: photo grid installation
Review of prices for photo grids for fences and facades
Models with imitation of live landscaping are popular. They are distinguished by good strength and durability qualities. The material is resistant to weather changes.
Photo grid with photo printing Greengo "Zhivaya hedge"
The model has a PVC base and is supplied in a set of 10 pieces. Packed in a special sealed bag.
This model shows a hedge. From a distance, such material looks like natural. The width of the canvas is 158 cm, the length is 250 cm. You can buy a photo grid for a fence at a price of 2380 rubles per running meter.
Photo grid Greengo "Beach"
Reliable PVC photo grid surface with bright colorful motifs. Price —20805 rubles.The mass of one module is 1820 g, the length of the model is 300 cm, and the width is 158 cm.
This type of fencing is easy to install and is considered to be resistant to any weather conditions. The material can be cleaned with a damp cloth without the use of abrasives. An analogue of such a canvas is a photo grid “Rada” for a fence, which may differ slightly in price.
Photogrid Greengo "Liana"
The module has standard dimensions of 200 × 158 cm. The product has a low degree of light transmission. The option is used not only for the design of fence spans, but also for building facades.
If the material is not used (removed for the winter season or vice versa), it does not require special storage conditions. The price as of 2019 is 1932 rubles per unit of goods.
Dear users, if you have any questions on the topic of the publication, do not hesitate to ask them in the comments under the article. Also share your experiences with the material.