How to clean and bleach the seams between tiles in the bathroom - returning the original look to the bathroom

Tags:Bathroom and toilet, With your own hands

The tiles do not require special care, but the seams between them gradually take on an unpresentable look, which makes the entire bathroom look filthy and ugly. If you have such a problem and want to know how to clean the seams between the tiles in the bathroom, the homemaster.techinfolux.com/en/ editorial staff has already tested the effectiveness of different products on their own experience and is ready to provide information and advice.

How to clean the seams between tiles in the bathroom

There are several cleaning methods for different causes of contamination

The content of the article

1 Why wash tile joints
2 Cleaning of tile joints with household chemicals
3 How to wash the seams between the tiles in the bathroom according to folk recipes
4 Steam cleaning of tile joints
5 Mechanical cleaning of tile joints
6 How to clean the seams between the tiles in the bathroom with special dyes or a bleaching marker
7 How to clean the joints between the tiles in the bathroom if the mold has penetrated deeply
8 How to clean the joints between floor tiles - additional guidelines
9 Video: how to clean the seams between tiles in the bathroom

Why wash tile joints

Any building compound for grouting, no matter how stable it is, still begins to darken from moisture and dirt. Bacteria, mold, fungus also contribute - these unfriendly comrades have conspired and purposefully spoil your repair. And the question of how to clean the seams between the tiles in the bathroom requires an urgent solution.

Cleaning of tile joints with household chemicals

To remove grease and limescale from seams, standard dishwashing detergents such as Fairy, CIF, AOS, Silit... On the floor, you also need to wash the seams between the tiles, this will help such tools asUltra-Stripper, BOZO.

There is a special liquid "Atlas Dolphin", which protects the tile joints from dirt

"Atlas Dolphin" used to protect and process the joints between tiles. The emulsion acts by forming a protective film.

Advice! If you use the emulsion immediately after applying the grout, the effect will be long-lasting, and you won't have to rack your brains with how to remove the dirt.

"BOZO" is a strong concentrate that deals with not only dirt, but also with rust, lime deposits, odors. The liquid is diluted in a 1: 4 ratio, but if the contamination is serious and old, then it can be used in its pure form.

How to wash the seams between the tiles in the bathroom according to folk recipes

Household chemicals are good, but before all kinds of means were developed, people somehow got out of the situation. For those who do not really welcome aggressive chemicals, we suggest trying at home to return the seams to their original cleanliness using folk methods.

Cleaning of tile joints - it's not as scary as it seems

Cleaning the joints between tiles with baking soda

One thing you can do well to clean the seams between floor tiles and walls is baking soda. Half a glass of baking soda, a third of a glass of lemon juice and a quarter of 9% vinegar are enough. 7 glasses of warm water are poured into a plastic bucket and all the listed ingredients are added. Armed with rubber gloves, open doors and windows and proceed. Cleaning will be faster if you use an old toothbrush instead of a sponge. The entire applied solution is left for 15 minutes.

The solution foams a lot, so there will be no problems with application. Foam can be removed with a sponge and water

There is also advice on how to clean the joints between the tiles on the floor and walls. The recipe includes baking soda, lemon juice, mustard, toothpaste and 7 glasses of water.

Cleaning of tile joints with ammonia

Cleaning the joints between the tiles should not be carried out when the grout color has turned black, but regularly - then much less effort will be expended. How to clean the grout between tiles with ammonia? You need to take 2 tablespoons of ammonia and add them to 2 liters of water. The mixture is poured into a spray bottle and sprayed on all problem areas.

After 15 minutes, wash all joints with water and wipe dry.

How to clean bathroom tiles with bleach

How can I clean the joints between floor tiles and walls with bleach, and can I do it? Any oxygenated bleach should be mixed 1: 1 with water. All impurities are sprayed from a spray bottle. The solution remains in place for half an hour if the contamination is moderate. For severe problems, you can leave the product for an hour. After the bleach is washed off, wipe all joints dry.

Regular whiteness also works effectively, especially convenient if it is in the form of a gel

Important! All work is carried out only with gloves!

Which of the combined means to clean the seams between the tiles in the bathroom

Despite the availability of a variety of chemical cleaning products, finances sometimes require savings. A great way to save money and effectively clean up dirt between tiles is to use a combination of baking soda and bleach. The method is not suitable for colored grout, since the gruel will corrode any color, but the white grout returns its original whiteness. The gruel is applied with a spatula, after 15 minutes all seams are washed with water and a toothbrush.

Related article:

How to wash an acrylic bathtub at home: suitable products, wipes and sponges, citric acid, vinegar, toothpaste; how to wash off yellowness, rust and limescale - read in the publication.

Steam cleaning of tile joints

The steam generator not only cleans all seams, but also perfectly disinfects all surfaces, removes mold and mildew. Steam does not form smudges, streaks on the tiled surface. Therefore, you need to run a jet of hot steam along all the seams, and then immediately remove the dirt with a damp cloth.

Mechanical cleaning of tile joints

If cleaning has not been carried out for a long time, then one day you may notice that a simple application of a cleaning agent is no longer enough - mechanical work is needed here.

Fine-grained sandpaper removes stubborn dirt well

The work must be carried out slowly and carefully, as the tile can be scratched. The cleaned seams are rinsed with water and wiped off. The method is safe for health, but it requires physical effort and time.

A hard sponge can remove dirt and mold

A hard brush with a cleaning agent can remove dirt

The more often you wash the dirt, the less effort will ultimately be required.

Related article:

How to clean the shower: household chemicals, folk remedies, how to wash glass and a pallet, how to remove limescale and mold, advice and recommendations of specialists - in our publication.

How to clean the seams between the tiles in the bathroom with special dyes or a bleaching marker

How else to clean the joints between the tiles in the bathroom? If the seams, despite all the efforts, did not begin to look fresh, you can use coloring compositions such as lime, water-based paint. There are also specialized formulations: Edding 8200, Pufas frische fuge, Fuga fresca.

Advice!You don't have to choose white. Dyes come in different shades, and no one forbids experimenting.

The effect of applying a marker remains for six months. It is very convenient to use the product, there are dimensions for joints of 2-4 mm - the size of the tip should correspond to the thickness between the tiles.

This marker is considered the most persistent.

Pufas Frische Fuge Komplettset, although inexpensive, is not sturdy either. There are different tinting additives, so you can often change the shades of the seams.

Fuga Fresca contains acrylic polymers, so it fits perfectly into the seam. Numerous tones and shades available

The final color may differ from the one shown on the package. Age and grout quality play a role here. It is also important to consider that many coloring compounds are not suitable for epoxy joints and those filled with silicone or polyurethane sealant.

Application is not difficult: the seams are cleaned in any way and treated with an antiseptic. After complete drying, the paint is applied with a brush or the tip of a marker (depending on the selected product). Fill vertical joints carefully, as paint can drip. The excess is removed with a rag. The work is completely ready in 24 hours. A whitening stick or marker is also referred to as coloring compositions, and what is especially pleasant, they contain fungicides. There is nothing easier than asking how to whiten the seams between tiles in a bathroom - with a special marker!

Related article:

How to wash a streak-free mirror in different ways: with water, various folk remedies, household chemicals, an antistatic napkin, how to remove limescale and traces of stickers and markers - read the publication.

How to clean the joints between the tiles in the bathroom if the mold has penetrated deeply

The property of mold is such that you can completely get rid of it only by completely replacing the grout. The seams need to be embroidered and all the sealant removed, all tile joints must be processed and dried. A new sealant can then be applied.

But if there is no desire to change the sealant, then there is a tile seam cleaner that will help to stop the harmful effects of mold - ordinary white vinegar or acetic acid (preferred)

It is easiest to fill a spray bottle with it and spray on the affected seams. The vinegar must dry completely, and after that, the entire space between the tiles is cleaned with a stiff brush and rinsed with water.

Hydrogen peroxide is also surprisingly effective against small colonies of mold. Cleansing with peroxide is completely identical to working with vinegar. But remember that peroxide can negatively affect the color of dark plastic if it is nearby.

Tea tree oil is diluted in a glass of warm water and the solution is applied to the joints. You don't need to wash off anything, you just need to ventilate the room. Furacilin kills the fungus; a working solution requires one tablet and a liter of water.

How to clean the joints between floor tiles - additional guidelines

Finally, we want to clarify some points:

acids will easily spoil the glazed tile, its surface will noticeably tarnish;
in order to preserve the quality of unglazed matte tiles, after the completion of all work, they are washed and covered with mastic;
it is not worth cleaning the space between glass tiles or mosaics with either alkali or acids;
abrasives hitting any tile can ruin it;
for floor joints, an epoxy base mixture is preferred.