If the plastic window does not close: several solutions to the problem with your own hands

A situation often arises that the installed plastic window stops closing. What to do in this case? It turns out that there is no need to call the master and pay for his services. It is quite possible to make all the adjustments with your own hands. Today we will try to figure out what to do if the plastic window does not close, as well as analyze other possible problems and methods for their elimination. It also makes sense to know how to perform maintenance, preventive maintenance and adjustment of locking mechanisms.

Plastic windows have long and firmly entered our lives

The sash can be adjusted according to various parameters

Possible malfunctions, their causes and solutions

There can be a lot of small problems. And most often they are all quite simply solved by the usual adjusting... Less often windows require replacement seals... The main faults are:

And this is switching to winter mode

We will deal with the listed malfunctions and methods of adjusting and repairing plastic windows.

Repair of plastic windows when the sash is skewed

A common reason for improper installation and initial adjustment. To fix it you need a hex (usually # 4). Here you need to understand that the upper sash hinge is responsible for adjusting the window to the left and right, relative to the frame, and the lower one - up and down. If the sash is skewed, then it must be urgently corrected. Otherwise, damage to the glass unit itself is possible, which is not cheap.

It is also possible to adjust by placing special spacers between the frame and the glass unit - for this you will have to remove the glazing beads. Work is carried out with the sash open, with periodic checking - the sash closes smoothly, while it is immediately clear whether the repair has been completed or not.

It's easy to find an adjustment key on sale

Loose fit of the sash to the frame is the most common reason

This can happen if plastic windows after a warm period are not transferred to winter mode... This is not difficult to do. Having opened the window, you should carefully consider the locking mechanism - there should be a corresponding mark on it. Usually, to transfer the mode, it is necessary to turn the central valve with a hexagon. After that, you need to close the window by pressing a sheet of paper with it. If done correctly, the paper cannot be pulled out.

How to open a plastic window if the handle is stuck

A blocker is most often to blame for this problem. This is a device that locks the locking mechanism in certain positions. With prolonged use of windows, it may not work in the right position. Most often this happens when you turn the knob to the closed state while the window is open. To eliminate it, it is necessary to bring the sash to a vertical position, after which the handle should turn. If this does not happen, most likely, you will have to change the locking mechanism.

Triple glazed windows are installed in colder regions

It can also happen that the handle wedges when it is not fully turned. The cause of such a nuisance can be both clogging of the mechanism and drying out of the lubricant. In the second case, everything is solved quite simply - in stores now there is a large assortment of various sprays. The best option is to use a silicone grease. If the mechanism is clogged, then it must be disassembled and cleaned.

The ventilation mode is quite convenient not only in summer, but also in winter

If the mechanism is jammed and the plastic window does not open (what to do), the video instruction will help you figure it out.

The sash opened for airing and opening at the same time

The reason for this may not be a malfunction, but a banal inaccuracy when opening. The problem is easily eliminated. The handle turns upward, while the sash must be firmly pressed against the frame by hand. When it is in place, we lower the handle down until it stops. Such actions should not be difficult.

A high-quality double-glazed window is a guarantee of silence and comfort in a home

All modern plastic windows are equipped with blockers that prevent such situations, however, excessive haste when opening it may prevent it from working. Do not try to open the sash when the handle is not in the right position - this will save you a lot of problems.

DIY plastic window repair when loosening the handle

This problem can be easily solved independently. To do this, turn the handle base plate clockwise. There will be two screws under it, which need to be tightened. If they are torn off, you will have to replace the handle completely, choosing a suitable one in the store.

In general, customizing plastic windows with your own hands is not difficult. It is only necessary to fully understand the design of the locking mechanism. The very same arrangement of plastic windows for different models differs slightly.

Much depends on the skill of the installer

What to do if the handle won't turn

In this case, you will have to disassemble the locking mechanism. This could be caused by debris and foreign objects getting between parts. Defective parts are replaced with new ones if necessary. It is better to entrust such work to specialists. Otherwise, there is a great risk that the mechanism will have to be blamed completely.

Blocking the drainage bar - what is the threat

Such a malfunction does not require anyabout special knowledge and skills to correct it. What to do if the plastic window does not close by this reason? The answer is very simple: you need to open the sash and just fix it low tide so that it does not interfere.

Competent specialists do the job very carefully

Prevention of malfunctions of plastic windows

To extend the life of a plastic window, periodic maintenance should be carried out. It is imperative to lubricate all parts of the locking mechanisms. Likewise, the adjustment of the flaps plays a rather important role: it allows you to increase the durability of the elastic bands that ensure tight closure, and reduces the risk of needingand repair of plastic window fittings.

Before the production of periodic prolactics should study the technical documentation of plastic products and their locking mechanisms as carefully as possible, so as not to aggravate malfunctions instead of preventing them.

Such glazing beads hold the glass unit in the frame

The nuances of repairing or replacing fittings

Most often, parts of window fittings that have become unusable cannot be repaired and require replacement. In this case, it is very important to pay attention to the weight of the window sash itself - this will be of decisive importance when purchasing hinges or a locking mechanism. The hardware may fit perfectly in size, but if it is designed for less weight, there will be no sense in such a replacement.

The design of the window is also important - it depends on which details will fit it and which will not.

Custom-made double-glazed windows are more expensive, but they are made exclusively according to the customer's size

Lubrication of parts of the locking mechanism and hinges

Most convenient forlubricate the locking and swing-out mechanisms of plastic windows with special seesprays, the range of which on store shelves is quite wide. Such sprays perfectly penetrate between moving, rubbing parts. It is recommended to carry out these works at least two to three times a year.

But at least once a year, it is necessary not only to smear, but also to clean the mechanisms of the old substance. It is on it that all the dirt and dust is collected, which eventually makes the part unusable. But before performing such work, it is necessary to study in detail the device, which is quite complex and, if incorrectly followed by installation, will simply stop working.

All mechanisms should be lubricated periodically.

Some tips for the operation of plastic windows

When using plastic windows, do not underestimate the importance of preventive maintenance. After all, if their age is not small, there is no guarantee that if any part fails, it will be possible to find a similar one. Otherwise, it is necessary to change the entire mechanism and it is not a fact that it will succeed. Or the whole window goes under the replacement, which can make a decent hole in the family budget.That is why you should listen carefully to the sounds that accompany the opening and closing of the sash. When a metallic grinding occurs, it is urgent to lubricate and clean the parts.

By moving the plug, you can stretch the fastening screws if the handle is loose

Adjustment is also required periodically. Do not forget about switching seasonal modes - this will significantly extend the service life of plastic windows.

High-quality ventilation is also very important - it does not allow condensation to accumulate on the windows. In winter, it can turn into ice on the profile, which has a detrimental effect on it. The same advice can be attributed to the fact that heating radiators should be under the window to remove excess moisture.

Plastic windows can be large enough

Related article:

What to do if the malfunction cannot be eliminated on your own

Not with all notserviceability can be handled independently. Very often, the plastic window does not open due to a jammed handle and the problem cannot be solved with your own hands. In this case, the help of a specialist is needed. But if the windows in the apartment were installed recently, then a company respecting itself and the client should have yesthere is a guarantee. Then it's not worth looking for a specialist on the side.

Well, if the warranty service has already ended, you can look for masters on the Internet. But it is worth remembering that you need to study customer reviews about a particular company as carefully as possible. After all, you don't want to pay a lot of money for outright hack. Indeed, in this case, it may turn out the same way as one of the Internet users.

WD-40 is a pretty good lubricant, but silicone is still better

Summarizing

Surely everyone realized that it is better to carry out periodic maintenance on their own than to face serious problems that require the help of a specialist. After all, if you follow all the instructions specified in the technical documentation, adjustment and lubrication will not cause any special difficulties. But the fact that these actions significantly extend the life of the windows is an indisputable fact.

Seals sometimes have to be changed

We hope that the information provided was useful to our dear reader. If you have any questions, you can always ask them in the discussions.

What to do if the plastic window does not close properly, how to adjust it - video instruction

RATE THIS ARTICLE

Loading...

 

See also:

We warm ourselves for the winter: a seal for plastic windows We save heat, or How to switch windows to winter mode Fiberboard - what is it: sheet dimensions, thickness and price of a similar material How to make a wardrobe with your own hands: drawings, assembly, examples of successful solutions Down with the consequences of repairs, or How to wash linoleum after it Criteria for choosing window grilles: 45 original solutions