Diagram of connecting a 220V LED strip to the network: how to do it correctly?

Not so long ago, the only way to illuminate private houses and apartments was all kinds of chandeliers... At that time, point and decorative lights were not yet used. Contemporary interior designs are complemented by various light sources. In this case, various methods are used. Decorative design techniques are especially popular. In this article, we will talk about how the circuit for connecting a 220V LED strip to the network is implemented. You can install such a structure yourself. Similar LED technologies are used in every interior. This is a great opportunity to illuminate individual decor elements, highlight the edging of furniture and emphasize the desired geometry of the room.

A simple diagram of an LED product contains a power supply and a controller mechanism

The use of LED strips and their advantages

The diode tape is a flexible base on which the contact strips are distributed with LEDs... The design is endowed with advantages:

An original product diversifies any interior

When choosing a diode strip for the ceiling or for other illumination, check such parameters as the level of protection, the color gamut of the glow and the density of the LEDs.

Ceiling lighting options with LED strip

Due to its compactness, significant grooves are not required to mount the light track to the ceiling. A few centimeters are enough for installation. In this case, monochrome products or trains of various colors are used.

Illumination of the hinged structure and individual elements

Choosing ways of how to install LED strips to illuminate the ceiling, you can choose different options for highlighting the contours. Depending on the dimensions of the diodes, such options stand out - SMD 5050 or SMD 3528. The first option is endowed with a more powerful glow of LEDs that can emit several colors (RGB - devices). If you have a remote control and a controller, you can set not only the color palette, but also the time interval.

Such devices are classified according to the number of diodes that are located on one meter of flexible track. The higher the density, the brighter the glow will be. To illuminate ceilings, you do not need to choose lamps with a bright glow, since such lighting will not be used as the main source of light, but will only slightly outline the contours.

Installation of the product in the ceiling plinth

Interesting ideas for using LED construction in the interior

Such devices are used as local lighting and complement basic lighting fixtures. They are also used to decorate a specific area. It could be apron in the kitchen area or the head of the sleeping bed.

The backlight looks stylish from both sides

With this lighting method, you can separate the work area in the kitchen. Decorative lights are used for kitchen cabinets and ceiling recesses. Lena at the bottom of the cabinet is used when the headset stands on legs. This creates the impression of floating cabinets. Cabinet lighting from the inside is becoming popular because of its convenience and functionality.

An original solution for the bathroom

The lighting in the bathroom looks unusual. In this case, you can highlight ceilings, walls and mirrors. LED strips can illuminate the space in front of a mirror or be mounted behind mirrors.

A cheerful and warm atmosphere can be created in the children's room with the help of multi-colored LEDs. Monochrome light sources accentuate décor elements and some furniture items.

Illumination of the working area in the kitchen

LED strips add volume to the shelves and shelving, when highlighting them from the end part. Specially illuminated paintings, curtains or curtains look spectacular.

How to choose LED strips for your home?

The connection of the LED strip 220V is carried out without a power supply. The device is connected to the power line with power cables. Such products are made with various forms of protection: from dust, dirt, moisture and mechanical damage. Self-adhesive tapes are made on flexible bases. In this case, the strip is cut into segments.

Installing the strip

The type of LEDs determines the possible power consumption of the product. Differs in a variety of light temperature and glow color palette. Installation is carried out using clips that provide an uncomplicated fastening. There is a sticky layer on the inside of the tape. To fix the structure, the protective layer is removed and the sticky side is fixed to the surface.

Laying the device in a profile

Installation nuances

Experts are well aware of how to connect the 220v LED strip circuit to the network. They can professionally carry out the installation and will give you recommendations on the level of illumination in the room and the even distribution of the backlight.

Individual RGB strip elements

Modern types of lighting equipment involve the use of high-quality cables with mandatory insulation. During installation, it is important to comply with all measurements and lighting requirements according to SNiP.

What is the price per meter of 220v LED strip?

Table 1. Average cost per meter of LED strip 220v

Picture	Models	Power, W	Number of diodes	Glow color	Cost, rub.
	Apeyron led smd 5050	12	60	RGB	1480
	Gauss led 5050	12	60	Cold white	1770
	Era 3528-220-60led	4,8	60	Greenish light	1400
	Apeyron electrics	12	60	Warm white	2070
	Novotech 357253	4,8	60	Warm white	1460
	Silverstar 5050 smd	12	60	Cold white	1600

LED products from different manufacturers differ in protection parameters, diode density and dimensions. The tapes are offered to consumers in rolls.

To create even illumination, purchase profiles with diffusers. For better camouflage, you can choose angle-type profiles that provide high-quality protection. There are products that can be plugged into a regular outlet.

Installation of individual elements in the lighting fixture

Since the tapes have different voltages, then immediately decide what additional equipment you may need. Most likely, these are power cords, power supplies and all kinds of connectors. The average cost of a meter of LED strip with 60 diodes is about 70 rubles. And the price for the same size for a product, but with 120 elements, will be about 140 rubles.

DIY tape installation

Diagram of connecting LED strip 220V to the network: subtleties of work

We suggest you consider how the circuit for connecting a 220v LED strip to the network is performed. We advise you to purchase a ready-made ribbon kit with all accessories. Since, buying parts separately, it is very difficult to correctly calculate the important parameters.

Connection diagram option

For example, RGB tape comes with the following items:

The diode track can be connected in different ways. A solid connection ensures the soldering of the wires. Bilateral type connectors or clamps are popular. On one side, the connector connects to the tape, and on the other side, wires are connected that supply voltage. The method with 220 volt clamps is used.

Different connection options for LED construction

RGB tracks are connected in a specific way:

Correct connection of the LED strip

With the help of LED structures, you can realize any design ideas and interesting projects. You can use original light sources for contour lighting of floors, steps, furniture sets and a variety of decorative elements. Such lighting is successfully used to illuminate hard-to-reach places and only ennobles the interior.

Video: options for a simple connection of LED strips

RATE THIS ARTICLE

Loading...

 

See also:

Decoupage for beginners: step by step with photos and rules for creating original products Self-adhesive furniture film is the ideal solution for inexpensive interior renovation We solve the problem of a crooked floor: dry screed. Pros and cons, reviews, price of materials How to calculate the area of ​​a room: professional advice and basic rules A practical choice for renovation - painting walls in an apartment: design, photo examples and types of paint Fabulous and festive stencils for window decorations for the New Year