Metal swing gates with a wicket: photos, specifications, installation instructions

Tags:Fencing

Any private sector, be it a house or a summer residence, needs a fence. One of its main elements is the gate, which can have a variety of configurations. In the same article, we will talk about metal swing gates with a wicket (photo examples are presented below) and their installation.

Fencing is a must for any private home

The content of the article

1 Installation advantages and disadvantages
2 Metal swing gates with a wicket. Photo and description of construction types
3 The device of swing products, recommendations for the choice of material
4 Choosing materials
5 Installation: step by step instructions
6 We install an automatic opening system
7 Drawing conclusions
8 Video: photo examples of metal fences and gates

Installation advantages and disadvantages

Swing gates are two or one sash mounted on pillars. They can open both outside and inside the yard, and be either automatic or mechanical.

Such a fence has a simple and convenient design.

As a rule, such a structure is made with a height of 5-6 meters to ensure the safety of the private sector from the penetration of criminals. The design often provides for a gate, which will allow you to enter the courtyard without opening the sash entirely.

For additional convenience, an additional passage is made

Installing swing gates has both pros and cons. Let's consider them in more detail.

Benefits:

Relatively low cost in comparison with other types of structures;
Simple installation, which, with proper skill, can be carried out independently, long service life;
The ability to embody your own projects and developments in the design;
In the event that the opening in the fence is not limited by anything, you can install the gate to the size of any vehicle.

Swing gates have a number of advantages

Disadvantages:

During installation, it will be necessary to thoroughly strengthen the pillars by burying them deeply and concreting them;
Such a device is difficult to use in conditions of frequent strong winds, since it will not be easy to open and hold them;
Installing automation can significantly increase the final cost.

The fence also has its drawbacks, which must be taken into account without fail.

Metal swing gates with a wicket. Photo and description of construction types

Metal structures have a number of different configurations, based on which you can choose the best option.

Wireframe with mesh

This option is perfect for those buildings where sun is needed for plants. This type can be performed with any decorative elements, and, moreover, has a low cost.

Mesh gate

Gates made of corrugated board with forging elements. Photo and description

More and more popular recently began to enjoy corrugated gate with forging elements. The photo shows that the structure is strong and durable. In addition, this material has a wide range of color and design solutions, and the gates from the profiled sheet can be made with your own hands.

Decking is a durable and durable material

Forged mesh gates. Photos and characteristics

Such a design has a stylish look, and, despite its fragile appearance, it has a high frame strength. Moreover, it has a relatively low cost.

Mesh gate - stylish and durable solution

Wrought iron gates - stylish and durable solution

With additional insulation

This solution is most often used in a harsh climate, for a garage or sheds. As insulation a wide variety of materials can be used, including wood planks.

Insulated gates - a reliable option in severe frost conditions

Helpful information! When choosing, pay attention to the material from which the fence itself is made, since the structure should be favorably combined with it.

The device of swing products, recommendations for the choice of material

Any hinged metal gates with a wicket, the photos of which are presented above, consist of the same set of elements:

The frame on which the decorative elements are installed.

The frame is the basis of any design

Sheathing, which is attached to the frame.

Sheathing is filling the space of the structure frame

The loop on which the frame is hung.
The pillars that support the entire installation.
A locking mechanism that allows you to close and open the gate.

To complete the installation, you will need a whole arsenal of materials and various tools: sand, cement, crushed stone, brick, paint, nails. If you decide to make swing DIY gate (drawings, photos and videos are presented below), then you will need, in addition to the above, additional devices: grinder, welding, various brushes.

It's easy to build such a building with your own hands. Drawings, diagrams, sketches and designs are freely available on the Internet

Choosing materials

It is necessary to approach with all responsibility the choice of materials for swing metal gates with a wicket. Photos, descriptions and other characteristics should be carefully studied.

Skin selection:

For this construction, a strong, sturdy material must be used. If this is a tree, then it must be additionally protected from rotting and treated from the appearance of various wood parasites. If you plan to use corrugated board, choose class C, H or HC.

Decking must be of class C, H or HC

The choice of material for the frame:

Welded frame - has the greatest durability and strength. Not suitable for automatic gate due to its impressive weight.
The aluminum frame is an excellent reliable option for automation, as it is lightweight.
The bolted frame is the easiest to manufacture, but also the least durable.

Helpful information! Use metal to create the frame, as it tolerates adverse influences more easily than wood.

Metal is the best option for the gate frame

The choice of material for pillars:

Brick is a strong and durable option that can support the weight of large structures.

The brick is highly durable

Concrete is the most reliable material, which, among other things, lends itself well to processing and cosmetic repairs.

Concrete is the best option

Installation: step by step instructions

With the right approach, it is easy to install any structure, for example, mesh or forged doors. A photo and a detailed description will help you do the job easily and simply.

The first step is to draw up a detailed drawing with all the necessary calculations for do-it-yourself swing gates. Drawings, diagrams, sketches and designs are easy to find on the Internet.

Drawing example

The support is being installed. To do this, a support is immersed in the pit, and the remaining space is covered with construction waste and poured with mortar.

Concreting options for metal supports

The frame is installed together with the installed skin.

Swinging metal gates are ready

We install an automatic opening system

In order to install the automation, you do not need to buy expensive special equipment, but you can use all the available rotary mechanism from the satellite dish. This option is notable for its low cost and ease of installation.

Drawing conclusions

So, in this article we were able to disassemble the device of swing gates, their types, materials for production and step by step dismantled the installation. Be sure that by carefully preparing and studying the proposed materials, you will be able to translate into reality even the most complex idea.