Automatic garage doors with remote opening: which to choose?

Tags:Garage, Fencing

FROMThe comfort of operation is significantly increased by automatic garage doors with remote opening from the remote control. However, the existing structures of garage doors have a different budget for the construction, operation of these communication systems. In principle, the opening mechanism can be mounted both on roller shutters and on hinged leaves. In the latter case, the resource decreases, the operating costs increase.

Automatic garage door with remote opening

The content of the article

1 Video: automatic garage doors
2 Types of garage doors
3 System operation principle, diagrams
4 conclusions
5 Video: how to choose an automatic garage door

Video: automatic garage doors

Types of garage doors

To choose an automatic garage door with remote opening for your own needs, you need to study the existing structures. Most often, several types of gate leaves are used:

swing - until recently were considered classics, two canvases open on hinged hinges, the maximum angle is 180 degrees;

Hinged garage doors

sectional - consist of hinged panels that slide upward when opened to the ceiling of the garage;

Sectional door type

roller shutters - the design is similar to the previous version, however, the panels are very narrow, which allows them to be wound on a drum rigidly fixed above the garage opening;

Automatic roller shutters

lifting and turning - the canvas is one-piece, it moves when opening along a complex trajectory in two planes;

Lifting and turning blade - a rather rare type

folding "accordion" - the canvas is made of several vertical flaps, movably fixed relative to each other, usually opens in two directions, the panels are placed perpendicular to the opening at the bearing walls;

Folding accordion gates

sliding - they are used only in industrial garages or on the sites of private owners, they usually have one long sash moving off along the wall.

Sliding gates are more commonly used for industrial garages

Each structure can be equipped with an electric drive in order to move the door leaves from home, car interior.

Related article:

Sectional garage door. Sizes and prices of popular manufacturers, a practical selection guide with installation tips in a special publication of our portal.

System operation principle, diagrams

Due to the variety of drive designs, automatic garage doors with remote opening should be designed before building a vehicle storage building. This will save you from alterations, making changes to the power frame of the building. However, the need to automate the process of opening the sashes may arise during operation. Therefore, all existing options need to be considered.

Swing gates

When operating, designing swing leaves of automatic gates for a garage with remote opening, several drives can be used:

underground - the lower part of the gate is attached to the drive, the upper part hangs on a standard hinge, the performance of the system depends on the alignment of the hinges, installation is extremely difficult for an amateur;

The underground drive is difficult to install

linear - installed indoors in the opening, activated by a contact switch or remote control, suitable for sash weighing within 3 tons;

Linear drive

lever - can be mounted externally, internally, the force from the direct pusher is transmitted gate through curved levers;

Lever drive type

The advantage of these designs is the use of existing garage doors, which somewhat reduces the initial investment.

Swing gate automation scheme

The disadvantages of automation schemes for swing leaves are much more:

when choosing an underground mechanism, the pit will have to be concreted, sealed to avoid water accumulation;
the sashes open outward, so cleaning of the adjacent territory is necessary, the presence of free space;
the maximum windage of the gate, therefore, from spontaneous opening, breakdown of the drive, limiting chains are used.

However, swing doors are usually made of sheet steel, so the vandal resistance and safety of the building are higher than other existing options.

Sliding gates

In contrast to existing designs, automatic sliding garage doors with remote opening are most often equipped with a ground rack and pinion mechanism. A worm rack with teeth is fixed to the sash, a gear is put on the electric drive pulley, which moves the structure. Therefore, a sufficiently large gap always remains at the bottom, which must be sealed with corrugation, rubber, and other methods.

Ground rack and pinion kit

A significant disadvantage is the sideways movement of the lengthy structure. Therefore, such gates are used with a sufficient width of the facade of the building. Instead of a rack drive, chain modifications can be used, but they are more noisy. To increase the resource, the upper part of the sash is often suspended on an additional traverse.

To use sliding gates, the garage must have a significant headroom

Up-and-over doors

In the absence of free space under the ceiling of the room (lintel), sliding modifications cannot be installed. Therefore, the car owner chooses a lift-and-turn panel, which can be made independently using frame technology (expanded polystyrene inside the bars) or from a sandwich. Spatial rigidity, stability of geometry is higher here, there are no hinged joints of the panels.

Scheme of a lift-and-turn gate structure

However, there are side guides, rollers along the edges of the canvas. The transformation mechanism, the fastening scheme of individual elements is the most complex of all existing drives.Measurements will have to be made many times; in case of builders' mistakes, it is necessary to correct the geometry of the opening. Therefore, it is better to order the installation of a specialistm.

The lift-and-turn mechanism is the most difficult to install

Important! It is very difficult to install a built-in wicket door in the overhead curtain. The cables occupy almost the entire rear surface of the panel at the bottom.

Related article:

Overhead garage doors: sizes and prices. This type of gate is the most popular, and therefore deserves a separate publication due to the many installation options and nuances. Read on!

Sectional doors

Sectional structures are the most popular for automating the remote opening process. The electric drive circuit is necessarily duplicated by torsion springs for manual operation. Self-installation is difficult, but available to the home craftsman - each product is accompanied by detailed instructions.

Sectional structure diagram

The advantages of sectional structures are as follows:

minimum loads on load-bearing walls;
high resource, maintainability, interchangeability of units;
comfort of use, ergonomic design;
easy integration of gates, ventilation ducts, windows;
minimum transport and operating costs.

In case of interruption electricity the gate leaf can be lifted manually. However, the presence of a minimum lintel is a prerequisite for installing the system.

Manual chain drive for sectional doors

Roller shutters (roller shutters)

Steel, aluminum long-length lamella panels form a roller shutter, which is wound on a shaft inside a special box, both with manual and mechanical actuation of the system. Therefore, it is enough to mount an electric drive at the end of the shaft in order to completely mechanize the process, leaving the possibility of manual control of the metal vandal-proof curtain.

Roller shutter motor

The advantages are in the budget price, quick installation, economy of the roadway, tightness of all units with special elements. Roller shutters are highly maintainable, the curtains can be replaced if necessary for a new interior of the building facade. It is not necessary to remove the drive mechanism.

Roller shutters are highly maintainable

Folding gates "accordion"

Private owners rarely use accordions made of vertical folding sections. The drives for automation of the opening process are completely similar to swing structures, with the exception of underground electric motors with levers.

The disadvantages also lie in the need for free space in front of the front facade of the building, cleaning the adjacent territory. Sashes are made of sandwiches, polymer panels, windows, wickets, ventilation air vents are built into them. Structures load bearing walls to a minimum, as they are lightweight.

Accordion gate with windows

conclusions

Thus, sectional and roller shutter gates equipped with automatic opening systems are more convenient to operate. It is dangerous to open swing structures in windy weather; it is necessary to clean the space in front of them after each snowfall. Sliding modifications are too noisy and require additional sealing of the junction points. Folding accordions are used in industrial workshops. Lift-and-rotate structures are not popular due to complex structures, installation of drives.