Stomping from above is not a problem: we make the correct soundproofing of the ceiling in the apartment from neighbors
Regardless of the original floor material, the soundproofing of the ceiling in the apartment will play an important role in blocking extraneous sounds from neighbors. The homemaster.techinfolux.com/en/ editors will share information about canvases and slabs, as well as how to arrange such a structure without professional skills.
Additional gluing of joints with adhesive tape
PHOTO: potolki-tom.ru
The content of the article
- 1 Noise insulation in apartment buildings: acceptable standards
- 2 What modern materials are used for noise insulation of the ceiling in the apartment
- 3 Do-it-yourself ceiling soundproofing installation methods in an apartment
- 4 Arrangement of noise insulation in an apartment under a stretch ceiling: features and rules
- 5 Acoustic systems for soundproofing the ceiling
- 6 Errors when installing soundproof panels
- 7 Review of prices for noise insulation of ceilings
- 8 Reviews of noise insulation of the ceiling in the apartment
Noise insulation in apartment buildings: acceptable standards
Normalized sound insulation values in apartments are often not the same. If during Soviet times the permissible limits were optimal, then in new buildings they leave much to be desired.
Arrangement of insulation with a frame
PHOTO: postroika.biz
According to the requirements of SanPin, the normal level is considered to be 40-55 dB in the daytime, and at night the noise in living rooms should not exceed 45 dB. However, it is best to stick to 30dB during the dark. However, this is not always possible, since the sound insulation between the ceilings practically does not fulfill its function.
Related article:
Noise insulation of walls in the apartment: an overview of modern materials, their advantages and disadvantages, advice and recommendations of experts - read in our publication.
What modern materials are used for noise insulation of the ceiling in the apartment
In order for the work not to go down the drain, and the layer of insulating material to be properly fixed, it is necessary to take a responsible approach to the choice of the canvas. This raw material has a large assortment.
Layout of insulation in the apartment
PHOTO: sdelaipotolok.com
An overview of ceiling insulation for an apartment
Long service and the effectiveness of the material directly depends on the brand of the manufacturer and the quality of the product. In order not to make mistakes when purchasing a dubious option, we recommend that you familiarize yourself with materials that have good characteristics.
- MaxForte SoundPro - the best soundproofing of the ceiling in a roll. Its thickness is 12 mm. Helps suppress impact and airborne noise. Sound absorption property corresponds to class “A”.
- MaxForte EcoPlita - excellent tool with a high level of noise suppression. It is a slab made of natural, odorless materials. There is no slag and other types of construction waste in the product impurities. The material is completely non-combustible, used for noise reduction in new buildings with thin partitions.
- MaxForte EcoAcoustic - Acoustic padding boards. The material is not afraid of moisture, hypoallergenic. In the composition of raw materials, there are no piercing and free-flowing compounds. There is no glue inside.
- Vibrostop Pro - material that effectively suppresses vibration and shock noise in the ceiling area. It is used for slatted ceilings and those structures based on metal profiles, suitable for wall decoration.
- Sealant MaxForte - a silicone compound that effectively seals joints and seams. Excellent vibration suppression. When processing the ceiling with this material, the appearance of fungus and mold is completely excluded.
In addition, soundproof membranes and special floors with synthetic fibers can be used. ZIPS panels are considered no less effective.
Ceiling material
PHOTO: mr-build.ru
How to choose noise insulation materials for the ceiling: professional advice
It is known that noise in an apartment affects not only a person's comfort, but also his health. Therefore, in order to get rid of intrusive sounds, you should consider some criteria for choosing a material.
- Pay attention to a brand that has long been known in the market. Usually, such compounds are more in demand for insulating ceilings.
- Avoid formulations that contain unnatural materials. They often cause shortness of breath, and can even provoke asthma.
- Loose items are also unacceptable. At the slightest noise from above, debris will be poured from the material under the influence of vibration, which accumulates in the finish, creating an additional load.
- Give preference to stoves if equipping plasterboard or stretch ceiling.
- The weight of the material should be low and the structure well compressed. It is important that one layer is installed as insulation.
- Soundproofing the ceiling in an apartment for DIY finishing should be selected simultaneously with the fastening material. It is advisable to use funds from one manufacturer.
It is possible to improve the quality of insulation by combining materials and selecting an individual technology for mounting panels.
Ceiling insulation materials
PHOTO: izomaxx.ru
Related article:
Soundproofing the floor in the apartment: device features for different types of floor coverings and bases, how to make and what materials can be used, as well as leading manufacturers of floor sound insulation, and an overview of prices for the most popular materials.
Do-it-yourself ceiling soundproofing installation methods in an apartment
Before proceeding with the processing of the ceiling surface, it is advisable to invite a specialist who will help determine the noise level, the need for its isolation, and also tell you about the characteristics of a suitable material. Then everything can be done by hand.
It is better to lay insulation in one thick layer in the frame
PHOTO: stroy-podskazka.ru
Frame arrangement of the ceiling with noise insulation in the apartment from neighbors
The technology of how to make ceiling sound insulation can be chosen if the apartment has a sufficient ceiling height.Otherwise, there will be a visual defect in space.
If working alone, use plate restraints
PHOTO: ibuildrussia.ru
How to assemble a suspended structure
It is best to carry out the lathing from a metal profile, which is lighter than wood. It is designed according to the following instructions.
| Illustration | Action Description |
|---|---|
 | On the place where the base of the structure will be, it is necessary to stick a special gasket in two layers. Temporarily fix the guides with self-tapping dowels |
 | We install vibration-isolating suspensions, fasten with an anchorline. The step is 800-900 mm. In this case, the distance from the wall to the first suspension should be less than 150 mm |
 | We attach the main profiles to the suspensions. For this we use self-tapping screws. The secondary profile is installed using a two-level connector. Step 400-500 mm. We remove the dowel-nails from the crate guides. This will help avoid acoustic bridging. |
Installation of soundproofing boards on the ceiling and topcoat
To do this, it is necessary to cut the material correctly if it is not packaged. Next, proceed to the installation.
| Illustration | Action Description |
|---|---|
 | We put soundproofing boards in the openings between the battens and the ceiling. To better fix them, bend the guides up. We install gypsum fiber boards on a metal frame. We fasten them with self-tapping screws. The material must be 10 mm thick |
 | Seams and joints are filled with vibroacoustic sealant. Next, sheathing with plasterboard sheets is performed. Surplus tape is trimmed and removed. Re-pass these seams with a sealant |
The soundproofing of the ceiling under the plasterboard in the apartment is closed with any finishing material.
On a note! Typically, all joints between soundproof ceiling tiles are quite wide. To save on aggregate, you can cut narrow strips of drywall and insert into the holes. Only then fill with sealant.
How to perform frameless ceiling noise insulation
This method provides for a simpler design. To create it, you will need to carefully prepare the base. It is important to correctly build the support brackets. More details about this in the video:
Arrangement of noise insulation in an apartment under a stretch ceiling: features and rules
The algorithm, which will be discussed below, is suitable not only for stretch ceilings, but also for armstrong-type surfaces. Particularly relevant is the question of how to make the soundproofing of the ceiling without special structures.
Having completed the preparatory work to protect the walls and floor, we proceed to the step-by-step algorithm for performing soundproofing of the ceiling in an apartment under a stretch ceiling.
| Illustration | Action Description |
|---|---|
 | We will collect all materials: insulation sheet, glue for heavy materials and fasteners. A roller and a bath for it will be used as tools. We measure the required length of the strip, and then cut it off. Cut off the acoustic layer on the one hand. It will play the role of a seam |
 | We apply glue to the ceiling. Do not lubricate the entire surface at once. Apply over a few meters. An assistant is needed here. We partially apply the glue to the soundproofing sheet and carefully attach the canvas to the ceiling, pressing it so that no air spaces arise |
 | After gluing, we stage by stage fastening with dowels, do not forget about installing the hats. It is advisable to perform even at the joints between the sheets of sound insulation |
Then all that remains is to install stretch ceilings. Remember that the thickness and stickiness of the glue must be sufficient, since the material tends to flake off, which will render all sound insulation and ceiling design in a panel house unusable.
Related article:
Noise insulation of the ceiling in the apartment under a stretch ceiling: varieties, step-by-step installation instructions, advice and recommendations of specialists - read in our publication.
Acoustic systems for soundproofing the ceiling
Special heavy canvases are used as acoustic materials.They are traditionally attached to an adhesive base and do not require any special lathing or holding structure. Among these options are:
- acoustic foam rubber;
- cork covering;
- acoustic ceiling - ready-made base, elements of which have been tested.
Convenient foam module
PHOTO: bravo-music.ru
Thus, the consumer does not need to individually select all the components of the structure. The system is a single whole, so everything is sold as a kit.
Errors when installing soundproof panels
Many people try to create a turnkey ceiling insulation in an apartment without resorting to the services of professionals. Therefore, they often encounter a lack of effect from the material. This is due to installation errors.
- The sound insulation was installed with too thin material.
- Absence of vibration mounts in a metal crate.
- Using expanded polystyrene foam to suppress noise (it's practically useless).
- Application of sound-absorbing plates without additional elements.
- One layer of soundproofing panels (at least two are required).
- Only rigid connections and abutments (it is better to use a special backing).
These and other inaccuracies significantly affect the process of soundproofing the ceiling from the neighbors above and transmitting vibrations.
For reliability, it is better to perform all fastening work in stages.
PHOTO: sunex-pro.ru
On a note! Polyurethane foam should not be used to fill the joints. It is completely not adapted for these purposes.
Review of prices for noise insulation of ceilings
In order for the sound insulation of the walls and ceiling in the apartment to retain its qualities for a long time, you need to give preference to high-quality materials. In the review below, we offer five interesting models that are best suited for apartments.
| Illustration | Model | Characteristic | Price as of October 2019, RUB per m² |
|---|---|---|---|
 | K-FONIK GK | Complete soundproofing system; reduction of noise level up to 26 dB. | 1081 |
 | K-FONIK B | It is used not only for soundproofing walls and ceilings in an apartment, but also for ventilation; absorbs noise up to 25 dB | 1620 |
 | MaxForte-SOUNDPRO | Noise reduction index up to 34 dB | 8330 |
 | MaxForte Standard | Sound reduction level up to 45 dB | 890 |
 | Maxforte EcoAcoustic | Suitable for stretch ceilings, functional in the frequency range 400-2500 Hz | 410 |
Reviews of noise insulation of the ceiling in the apartment
We also bring to your attention reviews on the models of materials for soundproofing the ceiling in the apartment.
Review of the Maxforte "EcoAcoustic" model:More details on Otzovik: https://otzovik.com/review_5629379.html
Feedback on the Maxforte Soundpro model:More details on Otzovik: https://otzovik.com/review_6287932.html
Another review on Maxforte Soundpro:More details on Otzovik: https://otzovik.com/review_7067247.html
Dear readers, did you install soundproofing of the ceiling in your apartment? What is your opinion of her? Do not forget to ask questions in the comments below the article, as well as rate the publication. Our team would love to hear from you.
Loading... See also:
Such practical and stylish racks for the room: is it possible to use them to zone the space 
How to choose glue for linoleum: varieties, advantages and disadvantages, features of use 
It's time to stop worrying about dust and dirt: how to choose the most suitable vacuum cleaner for your apartment 
Stylish room decoration: what can you say about the curtains on the eyelets 
What is interesting about cork flooring - we study the nuances 
3D panels for walls in the interior: original and embossed design
