An example of an estimate for the repair of a room, important points in drawing up

Long-awaited renovation in the apartment! In order for you not to hate it in a couple of years, you need to prepare for it. An example of an estimate for the renovation of a premise will help with this, because such data will show how much and in what amounts you need to invest to get your dream home. This is not just a list of purchases, but a whole document that can be entrusted to draw up also to specialists, but here be prepared to overstate costs. You can just as successfully compose it yourself, it is only important to know how.

How should the estimate for the overhaul of the premises look like?

The estimate includes all costs, calculates any unforeseen costs, including the services of specialists in different directions. In order to make an estimate, you need:

We use a tape measure to measure the room

We estimate the cost of building and finishing materials

All the data obtained must be recorded, and then drawn up in one table: so you will have a work plan + the cost of materials and the cost of paying for the work of specialists. It is also necessary to indicate the timing of the work, and if the infusion of funds is partial, then their dates of such receipts.

Nuances

The estimate is not only technical information, it includes an element of creativity.The technical aspect is at least a minimal knowledge of the processes that will occur during the repair, an understanding of the building materials market, what is needed for what.

Even within the same premises, the list of works can be very impressive.

A creative approach is a competent distribution of all cost items in accordance with the needs at one stage or another of the work. It is important to take a balanced approach to the selection of the team, if you trust the specialists. Do not be fooled by low prices - it is likely that the quality will be the same there. Better make an estimate yourself, minimal data and numerous templates they will help you with this. Why is it better to do it yourself? Everything is very simple: when ordering an estimate from a construction company, you will surely receive as a result 20, or even 30% more amount than it actually is. If you doubt the truth of the data, then you can easily use the services of one more "specialist" - these are auditors. As practice shows, the cost of the estimate will decrease by at least 10%.

Examples of

The photo below is an example of an estimate for the repair of a kitchen room. All types of work are categorized for convenience. Such options for estimates for repairing the premises will help you navigate and quickly figure out how much money will go to individual parts.

An example of an estimate for a kitchen renovation

Dismantling works are carried out in separate subsections. During overhaul, it will be necessary to dismantle not only plasters or old finishes, but also pipes, including sewers. And given that the plumbing is connected in the apartment, this work will also affect the bathroom. It is rational to carry out repairs in the bathroom / toilet and kitchen together: this way you can save money. This is followed by the treatment of walls, floors and ceilings. Here you can see that roughing and finishing works are included in one table, we would recommend separating them.

Also an important step in the preparation of estimates for kitchen renovation is the installation of plumbing. If pipes and it is better to add the riser to the specialists, since you have decided to use their labor, then it is quite possible to connect the mixer yourself, no serious skills or complex tools are needed for this.

Some types of work, such as connecting a mixer, can be done independently

As you can see, there are columns with measurement units, areas and lengths of all work points. For ease of calculation, the price per unit of work is indicated and then the total cost. The estimate will pull more funds if you entrust the construction company with the purchase of materials. But be careful here: it is often practiced to replace high-quality materials and components with low-grade ones. Therefore, it is important to control every stage of the work.

Below is an approximate estimate for the repair of the entire apartment, here is a slightly different drawing up scheme, but the meaning is the same. That is, the prices are per unit and the total cost of the work. As you can see, here the customer, most likely, will entrust the company with the purchase of materials, for this there is a special column, although it is possible he will purchase himself, and enter this data for clarity. Here is a more thorough study. Pay attention to the last point: the customer even took into account the cost of running down construction waste, which is also important when carrying out a major overhaul.

An example of an estimate for apartment renovation

If you will carry out the work with your own hands, then the following data should take place in your estimate:

If you are doing repairs with your own hands, then you need to include in the estimate the costs of hiring specialists or renting special tools, the purchase of which is inappropriate for one-time use. These include:

Factors that make self-repair inappropriate:

1. The harm of carrying out repair work.
2. The high cost of tools you will never use again

conclusions

For the correct budgeting or verification of such work from specialists, it is important to understand exactly how it should look. This will be best helped by illustrative examples of estimates and an explanation of the points included in them.

Video tutorial on how to make an estimate in Excel

RATE THIS ARTICLE

Loading...

 

See also:

How to make an estimate for apartment renovation yourself